Select Page

Are you ready to face the winter?

The leaves are changing and football season is in full swing which means it must be tune-up time for heating professionals everywhere. The dog days of summer might still be lingering, but this doesn’t stop those smart, proactive customers from making sure their home heating system is in tip-top shape and ready to face the chilly brutality of winter. Over the years, these smart customers have learned that regular heating system maintenance tune-ups are absolutely critical to the performance, energy efficiency and durability of their furnace. What a Quality Maintenance Tune-Up Checklist Should Look Like:

  1. Check thermostat operation and settings to ensure the heating system keeps the homeowner comfortable when home and saves energy when away.
  2. Check and tighten all electrical connections. Measure voltage and current on motorized components. Faulty connections will cause unsafe system operation and ultimately reduce the life of all major components.
  3. Properly lubricate all moving parts. Parts that lack lubrication cause friction in motors and increase the amount of electricity you use. The better lubricated your heating system is, the less energy it will require.
  4. Check controls to ensure system is operating properly and safely. Key the equipment’s starting cycle to ensure the system starts, operates, and shuts off by the book.
  5. Check fuel connections, burner, combustion chamber and heat exchanger. Improperly functioning fuel connections are dangerous—a massive fire hazard, not to mention a contributing factor to various health problems. A dirty burner or cracked heat exchanger can cause faulty burner operation resulting in an increased risk of unsafe of inefficient operation.

Benefits of Annual Maintenance Tune-Ups:

  1. Improved efficiency: Your heating system can only live up to its manufacturer expectations if it’s well loved—pristine and clean. In fact, most heating service professionals will tell you that dirt is the biggest enemy of energy efficiency to your furnace. As dirt accumulates on important components like the motor, air handler or heat exchanger, it creates friction, causing the system to consume disproportionate amounts of energy and also increasing regular wear and tear.
  2. Superior comfort: Left unchecked, dirt build-up in your furnace can be disastrous. As efficiency decreases, your furnace’s ability to generate heat does too. And excessive dirt doesn’t just hinder your furnace’s ability to produce heat, it can also impact the system’s other components as well. For example, too much dirt and grime on your furnace’s air handlers will drastically reduce its ability to distribute heated air throughout your home. When this starts to happen, you may notice that some of the rooms in your home just aren’t as warm and cozy as they once were. Don’t risk enduring a chilly home this winter, get your whole house heating system professionally serviced to make sure you and your family will be enjoying optimal levels of comfort all winter long.
  3. Extended life: Typically, a new furnace system will generally last around 15 years. However, you’ve got to remember that manufacturers assign these expected life spans under the assumption that the furnace will be ‘living’ in ideal conditions. This means that the only way you can hope to get the most of your furnace’s life span is to faithfully maintain and service it. In fact, some HVAC experts out there even claim that homeowners can actually extend that expected life span by up to five years with an annual maintenance plan.
  4. Low lifetime costs: The initial amount that you paid for your furnace is not an accurate representation of the overall operation costs. Taking operating costs into account gives you a better picture of your furnace’s lifetime costs. With regular, reliable maintenance, you can keep those lifetime costs low. Remember—a clean, well-lubricated system, lovingly maintained heating system is less likely to succumb to basic wear and tear and/or component failure, keeping repair costs low and energy savings high.

Approved Comfort Heating and Air Conditioning, Inc. was founded in 1993 with the guiding principles of quality, integrity, service, and commitment to our community. We strive to be the most desirable business to work for offering excellent compensation, exceptional benefits, and creating a corporate culture that inspires, supports, and empowers all those employed within our company. Call Approved Comfort today to get your annual heating system tune up before it’s too late!     Furnace Cleaning and Tune Up, with Carbon Monoxide Safety Inspection A furnace cleaning and tune up will only do so much. The technician can come in and clean all the parts, check the wiring, make sure the thermostat is correct, but what happens if something isn’t right? It might be a minor repair, but who knows if that small problem will lead to bigger ones down the road. This is why you have a furnace cleaning and tune up – to catch the small stuff. But if you want to get a head start to ensure your furnace will not break down in the middle of winter, then replacement is the best option. If you install a new Nicor Gas high-efficiency furnace between October 2013 and May 31, 2014, you’ll receive one of these rebates:

  • Installing one with 97% or higher Annual Fuel Utilization Efficiency (AFUE) receives a $400 rebate
  • 95% AFUE receives $300 rebate
  • 92% or lower AFUE receives $200 rebate

All rebate applications must be postmarked or submitted online within 90 days of installation, or by June 30, 2014.